G
®
THERMASREG
One-step mechanical single room controller THERMASREG
controlling temperatures in dry rooms, or for activating any kind of heating system as room thermostat.
For currentless open radiator valves, the cooling output from the changeover contact (normally open contact) must be connected.
At breaker contacts, a maximum of 10 valve actuators can be connected and at normally open contacts a maximum of 5 valve actuators.
TECHNICAL DATA:
Power supply: ........................ 230 V AC, 50 - 60 Hz
Sensor element: ..................... bimetal
Control range: ........................ + 5 ... + 30 °C
Output: ................................. breaker or changeover contact
Switching capacity: ................. 10 mA...10 (4) A, DC 30 W heating
(Contact load)
Operating difference: ............... ca. 0.5 K
Enclosure: ............................. plastic, material ABS,
Dimensions: ........................... 85 x 91 x 27 mm (Frija I)
Electrical connection: ............. 0.14 - 2.5 mm
Installation: ........................... wall mounting or on in-wall flush box Ø 55 mm,
Protection class: .................... II (according to EN 60 730)
Protection type: ..................... IP 30 (according to EN 60 529)
Standards: ............................ CE conformity,
Type ⁄ WG2
Temperature
Range
RTR - B 121 ⁄ B 124 ⁄ B 721
R T R - B 121
+ 5 ...+ 30 °C
R T R - B 124
+ 5 ...+ 30 °C
R T R - B 721
+ 5 ...+ 30 °C
RTR - B 747
R T R - B 747
+ 5 ...+ 30 °C
RTR -B
®
10 mA...5 (2) A cooling
colour pure white (similar RAL 9010)
2
via terminal screws on circuit board
base with 4-hole for mounting on vertically or
horizontally installed in-wall flush boxes for cable
entry from the back, with predetermined breaking
point for on-wall cable entry from top ⁄ bottom
in case of plain on-wall installation
EMC directive 2004 ⁄ 108 ⁄ EC,
low-voltage directive 2006 ⁄ 95 ⁄ EC
Function
Heating
Heating, Temperature reduction - 5 K
Heating, cooling
Heating, cooling
RTR-B in bimetal technology with thermal feedback for monitoring or
Output
Breaker
Breaker
Changeover contact
Changeover contact
Item No.
External setting
1 102-401 1-2100-00 0
1 102-401 1-2400-00 0
1102 -4 017-21 00-000
Internal setting
1102 -4 017-47 00-000