Go groove BassPULSE 5.1CH Guide De L'utilisateur page 11

Audio input
5.1 channel input: compatible with computers equipped with surround sound cards.
Move the input switch to 5.1 mode.
ON
Front speakers: Connect the green 3.5mm cable to the green FRONT 5.1CH INPUT port.
Rear speakers: Connect the black 3.5mm cable to the green REAR 5.1CH INPUT port.
Center speaker: Connect the orange 3.5mm cable to the orange CEN 5.1CH INPUT port
2.0 channel input: compatible with any audio device with 3.5mm headphone output.
Move the input switch to 2.1 mode.
Use one of the included 3.5mm cables to connect between your audio device and the 2.0 CH INPUT.
Playing audio
VOLUME
BASS
PULSE
5.1 CH
GREEN
BLACK
ORANGE
Use the volume and bass knobs to control the BassPULSE audio.
NOTE: For 5.1 audio surround sound, make sure of the following:
1. The settings in the computer as well as the media player/game settings
are set to 5.1ch output.
2. The media or game format supports 5.1ch output.
3. The volume is up in the media player/game, computer and BassPULSE.
Use the PULSE button to turn the LED lights ON/OFF.
For PULSE effect, turn and bass up past 80%.
PC
11
2.0 CH