Publicité
Les langues disponibles
Les langues disponibles
Safety Precautions
Read the following before installing or operating the Power
Distribution Unit (PDU)
1.
CAUTION! Use ONLY the supplied hardware (including screws, pegs
and cord retainer clips) to attach the mounting brackets. Using
different hardware or improper installations may cause damage
that is NOT covered by this warranty.
2.
The PDU must only be plugged into a three-wire, grounded outlet
on a circuit protected by a fuse or circuit breaker. Connection to
any other type of power outlet may result in a shock hazard.
3.
Do not use extension cords or adapters with this PDU.
4.
Never install a PDU, or associated wiring or equipment, during a
lightning storm.
5.
Check that the power cord, plug, and socket are in good condition.
6.
CAUTION! To prevent the risk of fire or electric shock, this PDU
should be installed in a temperature and humidity controlled
indoor area free of conductive contaminants. Do not install this
PDU where excessive moisture or heat is present.
Trouble Shooting
Problem
Possible Cause
PDU Outlets do not
Open breaker,
provide power to
Loose power cord
connected
equipment
Circuit breaker has
Sustained overload,
tripped
Excessive ambient or
internal temperatures,
Faulty breaker
Solution
Reset Breaker. Check if
plug is completely
connected.
If the problem remains
contact tech support.
Reset Breaker.
If the problem remains,
contact tech support.
Publicité
