D-Link DIR-867 Guide D'installation Rapide page 3

Hardware Overview
1 Power LED
2
Internet LED
Wireless
3
(2.4 GHz) LED
Wireless
4
(5 GHz) LED
Gigabit LAN
5
Ports (1-4)
Gigabit Internet
6
Port
7
Reset Button
8 WPS Button
9 WiFi Button
Power
10
Connector
11
Power Button
1
5
A solid light indicates a proper connection to the power supply. The light will
be a solid orange during boot up.
A solid light indicates connection on the Internet port. If the LED is orange, the
router cannot connect to the Internet.
A solid light indicates that the 2.4 GHz wireless band is enabled.
A solid light indicates that the 5 GHz wireless band is enabled.
Connect Ethernet devices such as computers, switches, storage (NAS) devices
and game consoles.
Connect a broadband modem or gateway to this port using an Ethernet cable.
Insert a paperclip in the hole, wait for 10 seconds, and release to reset the
router to default settings.
Press to start the WPS process and automatically create a secure connection
to a WPS client.
Press this button to turn on or off the wireless networks.
Connect the supplied power adapter.
Press to power the router on or off.
2 3 4
6 7 8 9 10 11
3