PROEM MDC-2F7SD Manuel Utilisateur page 7

4.3 Monitor Time Setting
Enter home screen page(refer to 4.1),thenTouch
next page.and then press
Input digitals by pressing the digital keypad, and press
location,and press
icon to return last page .
1 2
Camera 1 Camera 2
Monitor
Time
Home
4.4 Screen Setting
When the Monitor is in monitoring or talking
state, Press Adjust
screen setting page.Touch any item you
want,then touch
increase the value.Settings will be performed
immediately. Press
page.
4.5 Restore to Default
The restore to default function allows the
user to recover the settings to factory setting.
Note that the restore to default operation will
not change the time setting and the datas on
buit-in memory or SD card.
Enter home screen page(refer to 4.1),then
touch
User Setup
setting page,press Restore to default item,
the default settings will be loaded. press
icon to return to home screen page.
Home
Monitor Time
icon to save. Settings will be performed immediately, press
3 4
Camera 4
Camera 3
09/30/2010 Thu.16:41
icon to enter
to decrease or
icon to exit out the
icon to enter the
Monitor by Select
icon to enter monitor time setting page.
icon to change the setting
Monitor time set
min:[01] sec:[30]
1 2
5
4
7 8
0
5
Adjust - Adjust +
Door Station Intercom DoorBell
Call tone Call tone Call tone
Ring Night Ring Refault to
Volume Volume Default
Home 09/30/2010 Thu.16:41
icon to enter
3
6
9
Cancel
Brightness
color
scene
Talk Volume
Adjust Return
Clock
- 7 -