Publicité
Les langues disponibles
Les langues disponibles
AC ADAPTOR OF THE WHEATHER STATION
- Use the adapter indoors only, in rooms protected from moisture.
- Connect the AC adapter to the AC adapter terminal (4) on the back of the unit.
- Then connect the adapter to the mains.
INSTALLING THE BATTERY (CLOCK BACKUP)
Remove the clear tab on the bottom of the battery compartment (27) to activate the battery.
To replace the battery:
- Remove the battery compartment cover (27).
- Insert a CR2025 battery, respecting the polarity indicated.
- Replace the cover.
NOTE: Use only the battery type specified in this manual.
WIRELESS SENSORS (batteries not included)
- Open the batteries compartment cover (30) on the back of each sensor.
- Insert 2 x 1,5V LR03 (AAA) batteries, respecting the polarity indicated.
- Close the batteries compartment cover.
1 - USE OF THE WHEATHER STATION
WEATHER STATION
Place the weather station on a flat horizontal surface.
SENSORS
The sensors can be installed:
- either on the wall using a screw (not included). Hang the sensor through the hole (31) on the back.
- or horizontally
For best results:
- Do not expose the sensors to direct sunlight or moisture.
- Do not place the sensors more than 10 metres away from the weather station.
- Minimize obstacles (doors, walls and furniture) between the sensors and the weather station.
- Keep the sensors away from metal or electronic objects.
TEMPERATURES AND HUMIDITY
The weather station displays the following information:
- Indoor temperature (26) measured by the weather station
- Outdoor temperature (24) and humidity rate (23) from the sensors
CHOICE OF TEMPERATURE UNIT
- Press button (6) to select the temperature unit:
°C (Celsius) or °F (Fahrenheit).
WEATHER INDICATOR
When the unit is turned on, the weather station
will show the weather conditions in the form of icons:
POWER SUPPLY
INSTALLATION / UTILISATION
ICON
DESCRIPTION
Sunny
Sunny spells
Cloudy
Rainy
Publicité
