Annexe 2 : Nomenclature Des Colonnes De Données Des Fichiers Csv - Alliance Technology MeteoFile Manuel Utilisateur

Annexe 2 : Nomenclature des colonnes de données des fichiers CSV
Sensor Parameter
STX
Node Letter
Wind Direction Indicated
Wind Speed Indicated
Wind Speed Units
Status Field
ETX
Checksum
Pressure
Relative Humidity
Ambient Temperature
Dewpoint Temerature
Platinum Resistive Thermistor
Solar
Precipitation total
Analog Input 1
Analog Input 2
Digital Input 1
Sensor Voltage
Sensor Date
Sensor Time
Heading Magnetic
Heading True
Latitude
Longitude
North/South
East/West
LAT/LNG
GPS Date
GPS Time
/GPS Date and Time
Not Applicable
ALLIANCE Technologies
Mnemonic Use
STX Start of sentence delimiter
NL Node Letter/NMEA Sentence
WDI Wind Direction in degrees to 1 decimal place
WSI Windspeed in mps, to 2 decimal places e.g. 3.55
WSU Windspeed Units
STS Status Field. Normally "00" or "0000"
ETX End of sentence delimiter
CSM Checksum Field
HPA Pressure in HectoPascals / millibar
RH Relative Humidity, percentage to 1 decimal place
TA Temperature to 1 decimal place
TD Temperature to 1 decimal place
PRT Temperature to 1 decimal place
SOL Solar Radiation, in W/m 2
PT Total precipitation within the averaging interval
A1
A2
D1 Typically used for tipping bucket applications
VLT Sensor voltage to 1 decimal place
DATE Do not use
TIME Do not use
HDM Magnetic heading, degrees to 1 decimal place
HDT True heading, degrees to 1 decimal place
LAT NMEA GPS latitude
LNG NMEA GPS longitude
NS NMEA GPS latitude North or South
EW NMEA GPS longitude East or West
LATLNG GPS position in "Google" format as ±DD.DDDDDD:
±DD.DDDDDD:HH.HH Note: Height information is
ignored
GPSDT GPS date in DDMMYY format
GPSTM GPS time in HHMMSS format
GPSDTTM Maximet GPS date and time in the format YYYY-MM-
DDTHH:MM:SS.SSS
NA Used for a parameter to be ignored
Manuel utilisateur MeteoFile GSM version 2019-02 page 12