König Electronic CMP-WNROUT50 Mode D'emploi page 6

2) HOW TO OPERATE
Step 1. Insert the Ethernet cable into the LAN
Port:
Insert the Ethernet patch cable into the LAN port
on the back panel of the router, and an available
Ethernet port on the network adapter in the
computer you will use to configure the unit.
Step 2. Insert the Ethernet patch cable into
the wired WAN port:
Insert the Ethernet patch cable from the DSL
Modem into the Wired WAN port on the back
panel of the router.
Step 3. Power on the router:
Connect the power adapter to the receptor on the
back panel of your router.
Step 4. Complete the setup.
6