General View Of The Product; Getting Started; How To Levitate Your Althuria - INOVAXION ALTHURIA Manuel D'utilisation

GENERAL VIEW OF THE PRODUCT

GETTING STARTED

A/C POWER ADAPTER
The power adapter plug is located on the bottom.
To connect the power adapter :
1. Make sure to insert correctly the plug until the end of the port so that it does not exceed.
2. Connect the power adapter plug in the DC port.
3. Connect the other extremity of the power adapter in a mural catch (220 Volts).
- 14 -

HOW TO LEVITATE YOUR ALTHURIA

© ?
• Place the magnetic base on a flat level surface. If it's not horizontal, the levitating system cannot work.
• Plug the AC Adaptor into the Cosmic Base. Plug the other side of AC Adaptor into an outlet.
• Take the shade with 2 hands by the bottom side (North Pole upward) and approach it to the center
• Go down slowly the shade without forcing to find the «magnetic point». You will feel the system «takes» the
magnet by making small side movements.
• Leave the floating element in levitation.
• If during 10 to 15 seconds the system failed, wait 5 minutes and try again.
Let yourself be guided by the light ! Indeed, once the levitating globe will be turned on, you will know if it's
correctly settled.
1 2
- 15 -