novodio iSync Keyboard Manuel D'utilisation page 2

iSync Keyboard
User Guide
Bluetooth 3.0 Mac & PC
What's Inside :
• 1 x Novodio iSync keyboard
• 2 x AAA Batteries
• 1 x User Manual
• 1 x Protection Cover
System Requirements :
• Bluetooth® Enabled Computer or Mobile Device
• Mac® OS X 10.3.9 or later
• iOS 4 or later
• Also Compatible with Windows® XP/Vista/7/8 or later
(32-bit & 64-bit)*
*Some Mac special keys may not work with Windows.
Apple iOS (iPad®, iPhone®, or iPod®) :
• Launch the Settings application.
• Select Bluetooth and turn the Bluetooth on.
• Choose «Novodio iSync Keyboard».
• Your iOS device is now connected.
Assign a Different Bluetooth Key
to Another Device :
1. Make sure the Keyboard is powered on.
2. Follow steps 2-5 to pair additional devices.
Note: You are able to pair up to 4 Bluetooth enabled devices.
Pair up
to 4 devices
iOS Device Home Button
Pair your devices :
1. Install two AAA Batteries into
the battery compartment on the back
of the keyboard. (Fig. 1)
2. Switch to "ON" position to power
the Novodio iSync Keyboard. (Fig. 2)
3. Press the desired Bluetooth key to assign
(Fig. 3)
4. Press the Bluetooth pair button located
on the back of the keyboard and hold
for 3-5 seconds until the Bluetooth LED
5. Complete the Bluetooth Pairing
on your selected device.
Note : Some devices might ask you to enter a pairing code.
Switching Between Devices:
The Novodio iSync Keyboard can pair up to 4 different Bluetooth devices.
You will be able to switch between your paired devices by selecting the
appropriate assigned Bluetooth key (1,2,3 or 4). The Bluetooth LED will
LED light will then stay lit for 10-15 seconds before turning off.
Note : 2 to 5 seconds are necessary to switch between your paired
devices.
Reset thet Novodio iSync Keyboard :
To reset the Keyboard to factory default, simply press and hold the "fn"
key and Bluetooth Pair button. The master reset will erase any paired
devices on the Keyboard. You will have to delete the keyboard from your
devices before attempting to pair it again on these devices.
Mission Control Brightness -
Display
Switch Buttons
Brightness +
all the windows
Fig. 4)
Reverse Fast Forward Volume -
Play/Pause Power Volume +
Search Button
Mac® OS X :
• Go to System Preferences >> Select Bluetooth.
• Ensure Bluetooth is turned ON.
• Select the "Pair" button next to "Novodio iSync Keyboard".
1
• Follow the on-screen instructions for Keyboard Setup.
• Your Mac is now connected.
2
3
4
Power Management :
To preserve the battery usage the Bluetooth LED will turn off after 10-15
seconds once connection with your device is established. If the keyboard
is not in use, it will go into sleep mode after 30 minutes of inactivity.
Simply press any key to wake the keyboard up. It will take 2-3 seconds to
reconnect to the device selected.
Ergonomics :
Take care when using your electronic devices for long periods of time.
Avoid long harmful actions such as repetitive motions, uncomfortable
positions and prolonged use in order to prevent physical damage.
Take frequent breaks and use proper positioning when laying out your
workspace.
Mute Caps Locks LED
Bluetooth LED Battery Charge LED
Novodio iSync Keyboard