HQ P.SUP.EU40W Mode D'emploi page 2

Specifications Power Adapter
• Input voltage: 100-240 V AC, 50/60 Hz
• Output voltage: 12/13/14/15/16/17/18/18.5/19/19.5/20/21/22/23/24 V (DC)
• Output power: Max. 40 W
• Protection: short circuit protection, overload protection
• Efficiency: > 87%
• Dimensions: 45x28x95 mm
Power Up Your Notebook
1. Connect your notebook (or any other appliance that works within the offered output
voltage and output power range) with this power supply by connecting the supplied
detachable adaptor plug.
2. Determine the proper connector size. Check the polarity of your device and plug the power
tip into the socket of the power supply.
3. Set the DC voltage selector to the desired voltage position. Before you connect your
notebook computer find the required voltage setting on your original AC adaptor or in the
computer's user manual (PLEASE NOTE THAT AN INCORRECT VOLTAGE SETTING
MAY DAMAGE YOUR NOTEBOOK. IF YOU ARE UNSURE, DO NOT TRY TO CONNECT
IT TO YOUR COMPUTER BUT CONSULT YOUR LOCAL DEALER!!!).
4. Make sure that the total connected load does not exceed the rated output current of the
power supply.
ENGLISH
cen
Voltage selector
2
Center is positive
Center is negative