Technical Specifications - Immergas ZENITAIR MONO Manuel D'installation

2
TECHNICAL
SPECIFICATIONS
- Design front cover (A) removable for cleaning without the use
of tools.
- Inner ventilation unit (B) and wall support base (D) made of
high quality, impact and UV-resistant ABS, colour RAL 9010.
- Integrated multi-colour led (C ) to obtain a visual feedback of
the unit status.
- Smart humidity control.
- Integral temperature sensor for the automatic management of
the inversion time (comfort mode).
- Automatic anti-frost protection to prevent frost building up
on the heat exchanger.
- Wall support base (D) provided with a magnet "coupling/
uncoupling" system which allows the ventilation unit to be
removed from its base during maintenance.
- Back-up touch button (E) at the side of the ventilation unit.
I
H
G
- Unique design winglet-type impeller, providing enhanced
aerodynamic properties, low noise and increased efficiency.
- High efficient reversible EC motor with integral thermal pro-
tection, mounted on sealed for life high quality ball bearings.
Designed for continuous reversible running.
- Telescopic pipe (F) adaptable to the wall thickness.
- Antimortar cap designed to be used also as template during
the installation of the wall support base.
- Regenerative heat exchanger with ceramic core (G) with high
thermal efficiency, equipped with washable anti-dust filters
(H).
- External grille (I) made of high quality, impact and UV-
resistant ABS, colour RAL 9010, with anti-insect net and water
drip guard.
- Infra-red remote controller with touch technology, LCD display
and wall base supplied as standard. Made from ABS, RAL 9010.
- The unit is double insulated: no earth connection is required.
- No need of condensation drainage system
- IPX4 degree of protection.
- Power supply 220-240V~ 50Hz.
F E D
H J
13 13
C B A
Fig. 1