Publicité
Les langues disponibles
Les langues disponibles
8. Install blower.
Re-install blower. Secure blower with 2 screws from parts
bag and plug blower into black receptacle.
9. Finish ceiling, then install grille.
Plug light into receptacle in housing. Attach grille pan
to housing with (2) grille mounting screws. Install (2)
18W, GU24 fluorescent bulbs (included). Attach shade
hardware as shown. Do not overtighten finial nut.
(2) 18W, GU24
FLUORESCENT
BULBS
(included)
GRILLE
PAN
MOUNTING
ROD
FELT WASHER
(thick)
SHADE
FELT WASHER
(thin)
GRILLE
BRACKETS
LIGHT PLUG
JAMB NUT
GROUND WIRE RING TERMINAL
LOCKWASHER
(2) GRILLE
MOUNTING
SCREWS
FLAT WASHER
FINIAL NUT
RETROFIT
4. Remove old fan.
Enlarge ceiling opening (if necessary) to 9¾" parallel to
joist) by 10½" (perpendicular to joist). Leave ductwork
and wiring in place.
1
5. Fold mounting ears flat against
housing.
2
5
Publicité
