Maintenance; Cleaning; Inspection; Decommissioning - Vello FIX Série Manuel D'installation

7. maintenance

7.1 Cleaning

7.1.A Dry cleaning
• Vello Elektro advices to dry clean the
distribution box regularly. Before doing
this, make sure the box is diconnected
from the power supply.
7.1.B Liquid cleaning
• If considered necessary, the distribution
can be cleaned with a clean, wet cloth.
Before doing this, make sure the box is
diconnected from the power supply.
• Keep the protection degree in mind when
cleaning the box with liquid. Do not use
extensive amounts of liquid that might
harm the distribution box.
• Always check with Vello Elektro if the
cleaning fluid you want to use is allowed.
An unsuitable cleaning fluid might
damage the product.

7.2 Inspection

• Check if the earth leakage protections work
properly by pressing the TEST button.
• The owner of the distribution box has the
responsibility to let a qualified person do a (first)
periodical inspection according to NEN1010.
The frequency for periodical inspections will be
determined by the electro technician. Defects
have to be resolved by a qualified person, before
the box is used again.
installation and user manual

8. decommissioning

8.1 Decommissioning
• Let a qualified electro technician decommission
the distribution box.
• Make sure the power supply is switched OFF and
the disconnect plugged in connectors before
decommissioning the distribution box.

8.2 Removal

• Removing the electrical installation must comply
with the law and regulations in the country of use.
− 26 −