Publicité
Les langues disponibles
Les langues disponibles
Remote control (if any)
Keys and main functions
The remote control can be used to check the stove. The
remote control offers some functions which are not available
from the keyset, like the automatic programming of the
switching on and off of the unit.
How to use the remote control:
1. Direct the remote control on the control board of the stove
2. Check there are no obstacles between the remote control
and the receiver on the stove
3. Every function you set on the remote control must be
confi rmed pressing the key SEND.
After selecting the wished function, an acoustic
signal will confi rm your choice.
On/Off
This function is used to switch the stove and the remote control on or off. Keep the key pressed for at least
two seconds to switch the system on or off. Then press the key SEND.
You can use the two keys to set the wished temperature between a min. value of 7°C and a max. value of
40°C.
Please join the following procedure to set the functioning mode:
Automatic Functioning
power 1 (on1)
power 2
power 3
power 4
power 5 (on5)
SEND
Use this key to transmit the selected information to the pcb.
ECONO
This key activates or deactivates the function ECONO. Keep the key pressed for at least two seconds to acti-
vate or deactivate this function.
(on2)
(on3)
(on4)
LCD 1
LCD 2
13
Publicité
