Button
[MENU]
[TIMER] [UP]
[VOLUME] [DOWN]
[STOP]
o DMX 512 connection
The wires must not come into contact with each other, otherwise the fixture will not work at all or properly. Please note the starting
address depends upon which controller is being used. Only use a DMX cable and 3-pin XLR-plugs and connectors in order to connect
the controller with the fixture or one fixture to another
Connection with the mains.
The earth has to be connected. The device must only be connected with an electric installation carried out in compliance with IEC
standards.
o DMX-protocol
Channel
CH 1
Control speed of fan
CH 2
Control qty of fluid
HAZEBOX 1500 Manual Ver. 1.00
Interval set (5-200sec)
Duration set (1-200sec)
Timer out (1-100%)
Volume out (1-100%)
Fan Speed (1-100%)
DMX Add (001-512)
Fluid running out protection
Up/Activate Timer function
Down/Activate Volume function
Function
Function
Stop / Exit
DMX value
0~255 from small to large
0~255 from small to large
Explanation
Timer mode setting
Page 9