Publicité
Les langues disponibles
Les langues disponibles
First cleaning
Clean the device before the first use. (See 6. Cleaning)
Connection of the device
- Check that the tension and the frequency of the electricity network suit to the val-
ues indicated on the descriptive plate.
- Check that neither the cord nor the plug are damaged. If necessary, it has to be
replaced by the manufacturer, its after sale service or any qualified person to avoid
any risk.
- Make sure that every control knob is positioned on 0.
- Unwind completely the electric power cable and connect it in a plug connected
with the earth.
- The device is connected.
NB: in case of connection of the device in a plug without earth protection or directly on
the electricity network, confide its connection to a qualified person .
c) Use of device :
Elements of command and display
Command/Display
Commutator 4 positions
(n° 1 on picture) :
Position 0
Position 50%
Position 100%
Green pilot light (n°2 on
picture)
Orange pilot light (n°4 on
picture)
Speed regulator (n°3 on
picture)
Putting on
Turn on the commutator (n°1 on picture) on the wished position according to the
desired power.
The control pilot light (n°4 on picture) ignites.
Turn on the speed regulator knob (n°3 on picture) according to the desired cooking
time
Temperature setting
Set the power desired by positioning the commutator (n°1 on picture) to the wished
position.
Function
Stop
All the tubes warm (half power)
All the tubes warm (full power)
On/off
Machine is on
Minimum to maximum power
13
Publicité
