Description Of The Device; Operation - Omnitronic TM-250 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

4. DESCRIPTION OF THE DEVICE

5. OPERATION

5.1 Inserting/Replacing the batteries
Please refer to the explanations under Operating Determinations.
If replacing the batteries, remove the old batteries from the battery compartment.
Only replace by the same type or similar types recommended by the manufacturer.
Remove empty battery in accordance with the instructions of the manufacturer.
Insert a 9 V Alkaline battery and make sure that the poles are correct.
In order to have a long battery life, you should only use alcaline batteries.
Batteries are hazardous waste and should not be disposed of with regular domestic waste!
Please take old and used batteries to a collection center near you.
Danger of explosion when battery is replaced improperly.
BATTERY DISPOSAL NOTICE
Please dispose of old and used batteries properly.
1. Microphone input socket
2. Sensivity-Control
3. Battery LED
4. Operation selector (ON/MUTE/OFF)
5. Battery compartment
Caution!
11/23
13075005_V_1_0.DOC

Publicité

Table des Matières
loading

Produits Connexes pour Omnitronic TM-250

Ce manuel est également adapté pour:

Vhf 224.250Vhf 230.250Vhf 211.700Vhf 237.700

Table des Matières