Publicité
Les langues disponibles
Les langues disponibles
1.
Steam head
2.
Steam head with lock
3.
Water reservoir
4. Cord protection
5. On/off switch
6.
Handle
7.
Indicator light
8. Fluff brush
9.
2-in-1 brush
Follow these instructions when using the garment steamer for the first time: Carefully remove the garment steamer from
the packaging and remove all packaging material. Keep the packaging (plastic bags and cardboard) out of reach of children.
After unpacking the appliance, carefully check it for external damage that may have occurred during transport. Place the garment
steamer on a flat, heat-resistant surface.
The water reservoir can be filled up to the maximum indication with 260 ml of water.
To prevent possible production residues and unpleasant odours, we recommend allowing the garment steamer to steam
for a few minutes before using it for the first time.
We recommend trying the garment steamer on an old piece of fabric first, before you start steaming your first garment.
The compact garment steamer is only suitable for ironing, steaming, freshening up and disinfecting garments and other
materials, such as curtains. Simply remove folds and pleats from your garments or curtains or refresh them with the practical
compact garment steamer.
Check that the voltage stated on the information plate matches the voltage used in your region.
1. Push in the sides of the water reservoir and pull the water reservoir out of the appliance - fig. 1.
2. Open the cap [ A ] of the water reservoir and fill the water reservoir with water - fig. 2. Never exceed the maximum
indication. Make sure the water reservoir is always filled for one third at least.
3. Place the water reservoir back in the appliance.
4. Place the required brush on the appliance - fig. 5 or 7.
5. Insert the plug into the socket.
6. Press the on/off button to switch on the appliance. The indicator light lights up and the appliance warms up.
7. After approximately 35 minutes, the indicator light switches off and the appliance is ready for use.
8. Place you hand around the handle to pick up the appliance.
9. Press and hold the steam button [ B ] - fig. 3.
Gently press the steam head against the fabric and carefully move the appliance back and forth across the fabric.
The steam button [ B ] can be locked. Press the steam button and slide the button downwards - fig. 4. Slide the button
upwards to cancel the lock.
Caution! The steam coming out of the appliance is hot and the steam also makes your garment hot. Keep your hands away
from the steam
Caution! When using the appliance, avoid metal accessories on fabrics.
10. In order to stop you must let go of the steam button.
11. When you are ready using the appliance, remove the plug from the socket and allow the appliance to cool down before
you store it.
PRODUCT DESCRIPTION
PRIOR TO FIRST USE
USING THE GARMENT STEAMER
EN - 13
Publicité
