FDI K-PAD HF Notice D'installation Et D'utilisation page 7

Normal / long sequence:
Note, when a valid sequence is entered, the old access code is replaced by the new one.
Short sequence:
In this case, the code is automatically setup for the relay 1 and monostable mode.
Delete an access code
Only this slot is deleted. If the same access code exists in several slots (different relays), all slots have to be removed.
Delete all access code
All access code are deleted. The master code and the relay release time are not modified.
Relay release time
Set in the receiver.
Back light
To increase the life time of the batteries, it is possible to unactivate the back light. The following programming sequence
could be entered to turn on/off the back light.
Buzzer On/off
It is possible to turn off the buzzer, so the life time of the batteries is increased. The following programming sequence has
to be entered to turn on/off the buzzer.
101 0 5 12345 4 1
Slot
Nb of digits Relay
24h/7 User code Mono or bistable mode
102 0 5 52*95 #
Slot
Nb of digits
24h/7 User code
** 101 #
** to delete
Slot Validation
35 00 #
Slot Validation
00
36 00 #
Validation
Slot
00 not active
01 active
50-001-666 DOC.CLAVIER SAIL.KPAD HF FDI FR/GB/NL/DE.B
#
Validation
Validation