Ink Ribbon Replacement - Sharp EL-2607P Mode D'emploi

INK RIBBON REPLACEMENT

1. Remove the paper roll from the calculator.
(Tear the paper and remove it from the print
mechanism by using
2. Turn the power off before replacing ribbon.
3. Remove the printer cover. (Fig. 1)
4. Remove the old ribbon by pulling it up.
5. Insert the new ribbon.
6. With the black side of the ribbon facing
upwards, place one of the reels on the reel
shaft on the right. (Fig. 2) Make sure that the
reel is securely in place.
7. Thread the ribbon around the outside of the
metal guides. (Fig. 3)
8. Take up any slack by manually turning one of
the reels.
9. Replace the printer cover. (Fig. 4)
10. Replace the paper roll.
.)
Fig. 1
Fig. 3
7
Fig. 2
Fig. 4