Play2Run BP2200 Guide De L'utilisateur page 6

English
► What's in the box
®
• Play2Run BP2200 power pack
• USB charging cable : USB-DC
• 4 adapter for iphone, micro USB, mini USB and DC2.0
• Carry pouch
• User guide
► Quick start guide
First use
It is important to fully charge your charger BP2200 before the first use.
To do this connect the USB cable to the 5V power DC INPUT.
You can use a computer USB port to charge your charger or a mains charger with a USB plug
type PW2 - Play2Run
The LED on the front lights red during charging. When charging is complete it off.
The first full cycle can take up to 3 hours.
Charging an USB device
Plug the USB cable into the power plug USB OUTPUT.
You can use the supplied adapters in order to plug the power pack on your device.
Turn ON the power pack with ON/OFF button.
While charging the LED flash green. When charging is complete, it glows green, then after 30
seconds turns off BP2200.
The charging time depends on the device type and the nature of its battery.
It is recommended to charge your battery BP2200 soon as the light flashes green rapidly.
If you have not used your charger for several weeks it is possible that the LED does not
light up. In this case proceed to a full load as for initial use.
We recommend that you charge your battery BP2200 at least once every two months.
► Functions description
®
.
ON/OFF
USB OUTPUT
DC 5V INPUT
Micro USB
DC2.0
iPhone
Mini USB