Publicité
Les langues disponibles
Les langues disponibles
4) THERMOSTAT INSTRUCTIONS
1. Open the appliance as working conditions,(fan,warm,hot are all ok).This function only through
by Remote control.
2. To adjust temperature,press the "
set from 10℃ to 49℃.
3. When the air temperature drops 2 degree below the set temperature,the heater will start
heating with "I/W"(1000W).
4. When the air temperature drops 4 degree below the set temperature ,the heater will start
heating with"II/H"(2000W).
5. When the air temperature high 1 degree or ≤ the set temperature,the heater will blow the cold
air .
5) Week Timer FUNCTION
1.Open the appliance as working conditions,(fan,warm,hot are all ok).This function only through
by Remote control.
2.WEEK Press "
"button 1st time,"
HOUR Press "
01--00(01=1 o'clock,02=2 o'clock...00=24 o'clock ect.)
MINUTE Press "
from 00--59(01=1 Minute,02=2 Minute ect.)
---------------------------------------------------------This is open time
HOUR Press "
01--00(01=1 o'clock,02=2 o'clock...00=24 o'clock ect.)
MINUTE Press "
from 00--59(01=1 Minute,02=2 Minute ect.)
---------------------------------------------------------This is close time
The above are finised set Monday Timer.
3.Press "
" button once more,"
operate with open time HOUR/MINUTE and close time HOUR/MINUTE are all same as before
Monday.
4.From 1-7(1=Monday,2=Tuesday...7=Sunday ect.) are all set finised,press "
th
remote control 7
times to set from Monday to Sunday's temperature and press"
buttons,select the temperature which you need,the temperature range from 10℃ to 49℃.
PS:In Week timer function,when you set today's temperature,the thermostat function will start,the
rules same as 4) THERMOSTAT INSTRUCTIONS,pls noted.
You can set different open time ,closed time and temperature within whole week.
6) Window Open Function
1.Open the appliance as working conditions,(fan,warm,hot are all ok).This function only through
by Remote control.
2.Press "
" button, the "
models.(In this function,the appliance is check and record environment temperature in
immediately.It will stop working,when the appliance check the environment are drop ≧3 ℃.The
user should restart the appliance with "ON/OFF" button)
" lights on,show "1"means "Monday".
" button 2nd times,"
" button 3rd times ,"
" button 4th times,"
" button 5th times ,"
" lights on,show "2"means "Tuesday".Pls noted that the
" light is on.The appliance is working as smart saving energy
" to set the desired temperature and the temperature
" lights on, "
two buttons set the Hours from
" lights on, "
" lights on, "
two buttons set the Hours from
" lights on, "
two buttons set the Minutes
two buttons set the Minutes
" button on
two
23
Publicité
