Operating Your New Appliance - Sage the Smart Toast Guide Rapide

OPERATING YOUR NEW APPLIANCE

1. Insert the power plug into a 220 – 240V
power outlet then turn the power on.
BEFORE FIRST USE
We suggest toasting on the maximum
setting without bread. The toaster may emit
a thin smoke or distinct odor on initial use.
This is normal and not detrimental to the
performance of the toaster.
2. Place 1 slice of bread into each of the
toasting slots.
3. Select the desired browning setting by
adjusting the browning control slide on the
front of the toaster.
4. To start the toasting process, press the
TOAST / CANCEL button.
5. The A Quick Look™ button can be pressed
up until 10 seconds before the end of the
toasting cycle to view the browning of
the bread.
6. Once the toasting cycle has completed
and the carriage has risen and locked into
the raised position, the toast ready alert
will sound.
WARNING
Do not leave the toaster
unattended when in use as toast
may jam. In the unlikely event
that bread, crumpet, bagels or
muffins become jammed in the
toasting slots, all the button
buttons and the LED toasting
progress indicator will flash and
the elements will turn off. Switch
the toaster off at the power outlet,
remove the power plug and allow
the toaster to cool completely
before carefully easing the bread
out of slots. Take care not to
damage the elements.
NOTE
Toasting can be stopped at any time by
pressing the TOAST / CANCEL button.
A BIT MORE SETTING
™
To use this feature during the toasting cycle:
The A BIT MORE button surround will illuminate
™
in white when selected. The toasting time will
automatically increase but will not illuminate more
of the LED toasting progress indicator. A BIT
MORE function can be cancelled by pressing
™
the A BIT MORE button again and the original
™
toasting cycle will continue.
To use this feature after the toasting cycle
has completed:
The A BIT MORE button surround will
™
illuminate in white when selected. The carriage
will automatically lower and begin the additional
toasting time. The LED toasting progress
indicator will automatically align with the lowest
browning setting then flash and count down for
the additional browning time.
NOTE
™
The A BIT MORE
the TOAST, CRUMPET / FRUIT LOAF and
FROZEN functions.
CRUMPET / FRUIT LOAF BUTTON
To toast crumpets
1. Place the crumpets into the toasting slots
with crumpet tops facing inwards as per the
crumpet markings on the top cover plate
above the centre elements of the toaster.
2. To select the CRUMPET setting, press the
CRUMPET / FRUIT LOAF button once and
the button will illuminate white.
To toast bagels:
The CRUMPET / FRUIT LOAF setting can also
be used to toast bagels. Place the bagel centre
into the toasting slots with bagel facing inwards.
Start toasting with CRUMPET / FRUIT LOAF
turned on.
button can be used with
EN
7