FRIEDHELM LOH Rittal CMC III Notice D'installation Et Notice D'utilisation Succincte page 6

EN
Notes on documentation, Safety instructions, Product description
1 Notes on documentation
This installation and short user's guide is intended for experienced trained specialists and contains only
EN
the most important information concerning the assembly, installation and function of the CMC III Power
Supply (subsequently called power pack).
1.1 Associated documents
CMC III Power Supply assembly, installation and user's guide.
It is available at www.rittal.com and contains the complete application-relevant information and techni-
cal data for the power pack with regard to:
– Further assembly possibilities
– Details concerning the electrical connection
– Functions and services
– Configuration possibilities
– Detailed operating instructions
– Troubleshooting
2 Safety instructions
– Assembly and installation of the device may only be performed by experienced trained specialists.
– Any required mains power connection or a mains power wiring as part of the power pack wiring may
only be performed by an experienced electrician.
– The power pack housing must not be opened.
– The power pack may not come in contact with water, aggressive or inflammable gases and vapours.
– The power pack may only be operated within the specified environmental conditions (see
Section 3.4).
3 Product description
3.1 Functional description
The CMC III Power Supply is used for the power supply of the CMC III system. It can be connected
both to the socket and the input terminals of the CMC III PU or the CMC III CAN-Bus Unit.
3.2 Proper use
The power pack is used only for the power supply to the CMC III PU and possibly for additional power
supply to the CMC III CAN-Bus Unit. Any other use is not permitted.
3.3 Scope of delivery
– CMC III Power Supply
– Provided accessories (see Fig. 1)
– Installation and Short User's Guide
5 Rittal CMC III Power Supply