Surveillance Mode; Triggering Mode; Cleaning/Storage - Kompernass BA 105 A1 Mode D'emploi

Surveillance mode

If the appliance is in standby mode, press the mode selection button
to surveillance mode. The siren
status LED
as the green status LED

Triggering mode

GB
If an unauthorised person or a warm object enters the surveillance area when
the appliance is in surveillance mode, the red status LED
around 15 seconds, and the alarm is then sounded for around 10 minutes.
During this, the red status LED
the motion detector returns to surveillance mode.
Press the mode selection button
off manually. The appliance will then return to standby mode.

Cleaning/storage

CAUTION
► To avoid irreparable damage, ensure that no moisture gets into the device.
♦ Clean the appliance with a soft, dry cloth.
♦ If you decide not to use the appliance for a long period, remove the batter-
ies and store it in a clean, dry place away from direct sunlight.
38
illuminates for approx. 15 seconds. The alarm is activated as soon
goes out.
makes a brief signal sound and the green
is permanently illuminated. After this period,
to reset a false alarm or to switch an alarm
to switch
begins to fl ash for
BA 105 A1