CADO STEM 620 Guide De Démarrage Rapide page 12

Auto mode
Press the Auto button while the unit is in operation.
It detects the temperature and humidity of the room with the sensor and automatically
switches the humidity output in operation.
Rapid mode
Press the rapid button while the unit is in operation.
The operating mode switches to Auto mode after about 2 hours of operation.
Manual mode
Press the humidity output button while the unit is in operation.
The humidity output can be set according to your preference, regardless of the humidity level
in the room. The humidity output indicator changes according to the sequence described
below.
Timer
Press the Timer button while the appliance is in operation.
The power turns off automatically when the sected time elapses.
The timer indicator changes according to the sequence described below.
11
Intermittent
1 (h) 4 (h)
Low
8 (h)
High
OFF