Display controls
All functions and controls of the unit are
accessible from a control panel
conveniently located on the roof
refrigerator body. A display circuit board
allows easy configuration of features
and settings in a simple and intuitive
manner.
Important!
When the refrigerator is energized, all
the pilot lights will turn on for 3 sec and
you will also heard a long sound of
"beep". The display board consists of
four buttons and eight pilot lights. You
will heard a short sound of
when you press the button.
Controlling the temperature
We recommend that when you start
your refrigerator for the first time, the
temperature for the refrigerator is set to
-18°C. If you want to change the
temperature, follow the instructions
below.
Caution! When you set a temperature,
you set an average temperature for the
whole refrigerator cabinet.
Temperature inside the compartment
may vary from the temperature values
displayed on the panel, depending on
how much food you store and where
you place them. Ambient temperature
may also affect the actual temperature
inside the appliance.
1. Temp
"beep"
and the light of the comparable
t e m p e r a t u r e w i l l b e l i g h t e n
corresponding values according to the
following sequence.
2. Super
This feature also helps to keep the
vitamins and nutrition of fresh food for
longer period.
Press "Super" button to activate the
●
super freeze function. The light will
come on and the freezer temperature
setting displays -24℃.
Super freeze automatically switches
●
off after 26 hours and the freezer
temperature will revert back to the
previous setting
When super freeze function is on,
●
you can switch off super freeze function
by pressing "Super" or "Temp" button,
then the freezer temperature setting or
function mode will revert back to the
previous setting.
Press "Temp" button to set
freezer temperature between -
14℃ and -24℃ as needed,
℃
℃
-14℃
-16
-18
℃
℃
℃
-24
-22
-20
Super will quickly lower the
temperature within the freezer
so food will freeze faster.
.
12