Movie Cube S900H Guide D'installation Rapide page 4

The player can loop out the DVB-T signal to other TV receiver device. In this way, you can watch the TV programs with another
TV receiver while recording
4. Digital Audio Device connection
(1) Follow the picture and plug in the Toslink connector of your optical ber to the player's S/PDIF Optical jack;
(2) Follow the picture and plug in the other connector of your optical ber to the digital audio device (digital ampli er
or decoder).
(3) Select the appropriate input source in the digital audio device.
Note: Optical ber cable is an optional accessory sold separately.
5. Power connection
(1) Follow the picture and connect the AC adaptor to the player's DC IN jack;
(2) Follow the picture and plug in the AC adaptor to the power outlet.
6. Ethernet connection
To connect to a LAN (Local Area Network) you require a cat5, cat5e or cat6 network cable (not supplied).
(1) Connect one of the crystal plugs on the cable to the player's RJ45 LAN socket;
(2) Connect the other crystal plug on the cable to a RJ45 LAN port on your router, switch, or hub devices.
7. WLAN connection
(1) Make sure the player is powered on;
(2) Plug the Wireless LAN USB Adapter (i.e. Wi-Fi USB Dongle) to the USB HOST port of the player.
5