Page 1
SWI85SPL2 - SWI85T15 SAT+TV SPLITTER AND TAP PARTITORE E DERIVATORE SAT+TV REPARTITEUR ET DERIVATEUR SAT+TV SAT+TV TEILER UND SHUNT ISTRUZIONI PER L’USO - OPERATING INSTRUCTIONS INSTRUCTIONS D’EMPLOI - GEBRAUCHSANWEISUNG...
Page 2
Fracarro Radioindustrie is free from all civil and criminal dell’installatore, dell’utilizzatore o di terzi. responsibilities due to breaches of the current legislation L’installazione del prodotto deve essere eseguita secondo...
Page 3
à tout moment et sans préavis les produits décrits Im Störungsfall versuchen Sie bitte nicht, das Produkt zu dans ce mode d’emploi. Consulter le site www.fracarro.com reparieren, andernfalls verfällt der Garantieanspruch. pour connaître les conditions d’assistance et de garantie.
Page 4
SWI85SPL2 EN: 2 way SAT+TV splitter. Divides the 4 IF polarities and the TV signal, evenly. It can be used where you need to split the trunk with equal losses. DC voltage is allowed to pass on each of the 4 polarities only by their respective output lines, it is also bidirectional. By inserting a voltage on the dedicated input (DC input), the voltage will be then available for all the output and input lines (see figure).
Page 5
SWI85T15 EN: 1 way SAT+TV tap. It divides the signal in two ways. One pass through line and one tap line with -13dB. It can be useTyou need to tap the trunk line. It has the F connector that allows the DC power through all SAT line (see figure). the DC voltage can be put into all SAT input/output line and it allows into all SAT output/input line.
Page 6
V/L undH/L an. Der Ausgang am letz- TV DC ten Switch muss mit 75 Ohm abgeschlossen SWI8516PLUS SWI8516PLUS SWI8516PLUS werden. Beispiel : T75IF. Der maximale Strom SWI85SPL2 pro Leitung beträgt 1,5A. SWI8516PLUS SWI8516PLUS SWI8516PLUS UX-QT LTE UX-QT LTE 3 4 5...