Fine Dine 239193 Mode D'emploi page 8

Troubleshooting
If the appliance does not function properly, please
check the below table for the solution. If you are
still unable to solve the problem, please contact the
supplier/service provider.
Problems
The appliance does not switch ON.
Cooling fan is operating even after the
appliance is switched to OFF mode.
Technical specification
Item no.
Operating voltage & frequency
Rated input power
Protection class
Power level range
EN
Dimension (control box)
Dimension (main part)
Build-in dimensions (main part)
Build-in dimensions (control box)
Remark: Technical specification is subjected to change without prior notification.
Warranty
Any defect affecting the functionality of the ap-
pliance which becomes apparent within one year
after purchase will be repaired by free repair or re-
placement provided the appliance has been used
and maintained in accordance with the instructions
and has not been abused or misused in any way.
Your statutory rights are not affected. If the appli-
ance is claimed under warranty, state where and
8
• Error codes shown on the digital display (3). (See
--> Error codes display)
Possible cause
- Power connections are not connect-
ed properly with the power grid.
- ON / OFF button (1) is not pressed.
- This is normal. The cooling fan con-
tinues running in Standby mode for
some time to cool down all internal
elements.
239193
800W
1 ~ 10 (level 1 is the lowest and level 10 is the highest)
Ø245x(H)78mm
Ø236mm
when it was purchased and include proof of pur-
chase (e.g. receipt).
In line with our policy of continuous product devel-
opment we reserve the right to change the product,
packaging and documentation specifications with-
out notice.
Possible solution
- Check the power plug to make sure
it is connected properly.
- Press and hold ON / OFF button (1)
to switch the appliance ON.
- Wait until the cooling fan stops ro-
tating.
220-240V ~ 50/60Hz
Class II
137x61x(H)42mm
350x350x(H)80mm
290x290mm
55x130mm
239551
1000W