Connections Presentation; General Instrument Settings - PEWA C.A 1051 Notice D'utilisation

1.3 Connections presentation

5
1. Pressure socket (+).
2. Depression socket (-).
Connection of silicone tubes for measure of pressure or air velocity / air flow with Pitot tube.
3. Thermocouple K input (T1).
4. Thermocouple K input (T2).
5. Channel 1 (C1) : Connection of the hot-wire air velocity, vane air velocity, hygrometry.

2. GENERAL INSTRUMENT SETTINGS

To reach the various settings:
Switch on the device (do not connect a probe).
Press then on « ON / OFF ».
The following scrolling down menu appears :
Date and hour.
Retro-lighting.
Contrast.
Keys Beep.
Languages.
Automatic stop.
To validate a function, press on the knob when the wished function is shown on the screen.
To escape from the menu, two capabilities :
Some modifications have been made : validate the modification by pressing on the knob.
You will get out of the menu.
No modification have been made : press on « ESC ».
Press on « ESC » to come back to the different measurement functions.
2
1
3 4
18