Playing a Blu-ray Disc or DVD
This owner's manual explains the basic
instructions for operating this unit. Some discs
are produced in a manner that allows specific or
limited operation during playback. Therefore,
this unit may not respond to all operating
commands. THIS IS NOT A DEFECT. Please refer
Playing a Blu-ray Disc or DVD
1. Press
button to turn on the unit.
See CUSTOMIZING THE DVD FUNCTION SETTINGS before proceeding to step 2.
2. Press
button to open the disc door.
3. Gently place the disc in the tray.
4. Press
button to close the disc door. It takes a short while for your unit to load the disc. After
loading, for most discs, the unit will automatically take you to the main menu or start playing. If
the unit does not automatically start playing the disc, press the
Pausing Playback (Still Mode)
Press the
(PAUSE) STEP button to pause. To resume normal playback, press the
time you press the
Stopping Playback
To stop playback, press the
on the disc, playback starts where it stopped or at the beginning of the disc.
If you press the
button will reset the disc to the beginning.
Skipping to a Different Track
• Press the
SKIP button to go back to previous titles/chapters/tracks.
• Press the
SKIP button to advance titles/chapters/tracks.
• For an audio CD, use the number buttons on the remote control to go directly to the desired track
number.
Zooming into an image
While a disc is playing, press the ZOOM button to enlarge the image in serveral levels.
• While an image is zoomed, you can use the
display the part you want.
• When you reach the edge of the image, the display will not shift anymore in the direction.
Fast Forward / Fast Reverse
1. Press the
or
• The disc begins a fast scan at two times normal (x2) speed.
• Each time the
2. Press the
PLAY button when you have reached the desired point to resume playback at normal
speed.
Audio Selection
On some discs, the sound is recorded in two or more formats. Follow the directions below to select
the type of playback.
1. While a disc is playing, press the AUDIO button to show the current audio format number.
2. Press the AUDIO button repeatedly to select the desired audio format.
Note:
• If only one audio format is recorded, the number does not
change.
• About two seconds later, playback continues in the new audio format.
BRC11072E_Eng_NO Pandora & YouTube.indd 13
(PAUSE) STEP button, the picture advances one frame on disc.
STOP button. To resume playback, press the
STOP button twice, the unit's memory will be cleared and pressing the
button when a disc is playing.
or
button is pressed, the speed of the fast scan changes.
2x
4x
2x
4x
to the instructions accompanying the specific
disc in question for more information about
the options available on that disc.
"
" may appear on the screen during
operation. A "
operation is not permitted by the unit or disc.
,
,
or
CURSOR button to shift the view and
8x
16x
32x
8x
16x
32x
4 / 4 English Dolby Digital Stereo
" means that the desired
PLAY button.
PLAY button. Each
PLAY button. Depending
PLAY
13
6/25/2011 10:39:18
EN