Battery Connection - SCS Sentinel VST-C588H Manuel D'installation Et D'utilisation

INSTALL THE DETECTOR

BATTERY CONNECTION

ENGLISH
1. Remove the lock tab from its
support (by breaking the moun-
ting points)
2. Mount the support onto a ceiling
1.
or a wall
3. Place the detector on its support
and rotate it clockwise to engage it
4.
4. Lock it into place by inserting the
lock tab into the support hole
1. Open the battery housing
1.
2. Insert the 9V battery, ensuring
correct polarity
2.
3. Close the housing
4. Check it is working correctly by
running a test (see next page)