5. OPERATING INSTRUCTIONS
It is recommended that you installed your appliance in a place where the ambient temperature is
between 16-38°C. If the ambient temperature is above or below recommended temperatures, the
performance of the unit may be affected and it may not be possible to obtain temperature between 4-
18°C.
You can install up to 6 bottles in your device. Be careful, when placing your bottles inside, make sure
to position them so that they do not touch the inside walls.
Setting your device
When you connect your device, the display will show the actual temperature inside the device.
-
Press and hold for 3 seconds
the inner light flashes 2 times to indicate that the control panel is unlocked. After 30 seconds of
non-use, the control panel will be unlocked.
-
Set the temperature of your device between 4 and 18°C by pressing the
(decrease)
. Press the button once, the temperature will increase or decrease by 1°C.
-
Press the button
NOTE: since this device is not equipped with a fan, there may be temperature variations in the
cavity.
After placing your bottles in the appliance and setting the temperature, wait 2 hours for the bottles to
be at the required temperature.
to unlock access to the settings. a "BEEP" sounds 4 times and
to turn on or turn off the interior light of your device.
31
(increase) and