Removing The Push Tractor Unit From The Printer - Star PT-10Y Mode D'emploi

Removing the push tractor unit from the printer

3
Making sure that the release lever on the PT-10Y Tractor Feeder is pressed
down, position the tractor feeder so that the two U-shaped pieces on the
tractor feeder come into contact with the round tabs inside the printer.
Release lever
Lower the back of the tractor feeder down so that its two tabs smoothly
enter into the tractor feeder hooks and snap into place.
Raise the release lever so that it locks the tractor feeder onto the printer.
Re-install the automatic sheet feeder as described in the printer's Users
Manual.
Close the front cover of the printer.
Removing the push tractor unit from the printer
Make sure that the printer is unplugged from its AC power source.
Open the front cover.
Detach the automatic sheet feeder.
Press the release lever down to unlock the tractor feeder.