Alba LEDVIVA Notice D'utilisation page 2

INSTRUCTION MANUAL
For your convenience to enjoy all advantages of this product,
please carefully read user manual before using.
Main Features & Technical Parameters
Power supply: DC12/1.5A
Rated power : 10W
Light source: High photosynthetic efficiency semiconductor LED
(lifetime > 30 000H)
Three light modes switch: white light (2800-3200K) natural light
(4000-4500K) - yellow light (6000-6500K)
Max illuminance: ≥1600LUX (The Intensity of Illumination measured
from the lamp perpendicular to the table top 37cm distance)
CRI >80
Dimming type: Capacitive touch control ON/OFF key, Step-less
dimming
Control setting on the back of the lamp (Date –Time – Alarm – Tempera-
ture)
USB connection at the back of the lamp
Operating Instruction
1. Connect the power adapter in the rear of
the lamp base
2. Brightness and mode adjustment (ref to the details from Light Control
Section):
ON/OFF UP
MODE DOWN
Turn on the lamp: press the "ON/OFF" key to turn the lamp on or off.
Brightness adjustment: In the open state, click the "UP" key to increase
lamp brightness. In the open state, click the "DOWN" key to decrease
lamp brightness
3. Light mode: Press the "MODE" key to adjust the three-color
temperature modes: Natural white light – 2. Cold white light – 3. Warm
white light
Light display control (Back of the lamp)
1 pc CR2032
At the back
of the lamp
1. Time & Date setting
Press (+) for the time format (12 or 24H)
Press (S) then (+/-) to set the time, then confirm (S)
Press (+/-) to set the minutes, then confirm (S
Press (+/-) to set the year, then confirm (S) (On screen Hour/min)
Press (+/-) to set the month, then confirm (S)
Press (+/-) to set the day, then confirm (S)
The sequence of settings is Hour - Minute - Year – Month
2. Alarm
Press (M) to enter in the alarm mode
Press (S) then (+/-) to set the time, then confirm (S)
Press (+/-) to set the minutes, then confirm (S)
Press (+/-) to set the alarm duration (0-60seconds), then confirm (S)
Press (+/-) to select your music, then confirm (S). 8 different music
exist.
Press (+/-) to activate the alarm and snooze function. The sequence of
settings is Snooze On - Alarm On - Snooze Off and Alarm Off, then
confirm (S). With the Snooze function, the alarm will start again.
Press (S) or any other button to stop the alarm.
Press (M) to deactivate the alarm
The sequence of settings is Hour - Minute - Snooze - Music - Back
3. Temperature
Press (-) to set the temperature format (Celsuis or Fahrenheit)
4. Brightness of the LCD display
When your lamp is on, you can change the brightness of your LCD
display screen. Press ( ) to increase or decrease the brightness.
You can also turn off the screen.
remove
the tab
open close
1 Lamp
1 Charging cable
1 instruction manual
1. The LED light source of this lamp cannot be replaced. When the light
reaches the end of life, it will be necessary to change the lamp.
2. Do not disassembly the product. The product will not be any more
under guarantee.
3. Only a cable with the same specifications as the one supplied will
replace it (DC12V / 1.5A)
4. Do not get your eyes too close to the light source when the lamp is
on to prevent accidents.
5. This product is not suitable for outdoor use.
6. In order to not damage the product, it should be protected from rain,
moisture, and a high temperature
Product Illustration
36 cm
60 cm
0.7 cm
12 cm
1.5 cm
19 cm
Package contents
Cautions