IMPORTANT SAFEGUARDS
When using electrical appliances, basic
safety precautions should be followed,
including the following:
Read all instructions before using.
1.
Do not touch hot surfaces. Use handles
2.
and knobs when available.
This appliance must be properly
3.
installed and located in accordance
with these instructions before it is used.
The use of accessory attachments
4.
not recommended by the appliance
manufacturer may result in fire,
electrical shock, or injury to persons.
Do not place on or near a hot gas or
5.
electric burner, or in a heated oven.
Do not use outdoors.
6.
To protect against fire, electric shock,
7.
and injury do not immerse cords, plugs,
or the appliance in water or any other
liquid.
Do not overfill the Water Tank
8.
with water.
Use only water in this appliance! Do
9.
not put any other liquids or foods in the
Water Tank except as instructed in the
Cleaning Instructions in this guide.
Turn off and unplug the brewer before
10.
cleaning or maintenance. Allow to cool
before putting on or taking off parts
and before cleaning the appliance.
Safe Operation & Use
For best operation, plug the appliance
11.
into its own electrical outlet on a
dedicated circuit to prevent flickering
of lights, blowing of fuses, or tripping a
circuit breaker.
Do not operate any appliance with a
12.
damaged cord or plug or after
the appliance malfunctions or is
damaged in any manner. Contact
Keurig Customer Service or Keurig
Authorized Distributor (KAD) to report
any malfunction of or damage to the
brewer.
Do not let the cord hang over the edge
13.
of the table or counter, or touch hot
surfaces.
To disconnect, press the Power Button
14.
on the right front of the brewer to "OFF"
status and then remove the plug from
the wall outlet.
Close supervision is necessary when
15.
any appliance is used by or near
children.
Do not press the PRESS Button while
16.
brewing is in progress.
This appliance is equipped with a power
17.
cord having a grounding wire with a
grounding plug. The appliance must
be grounded using a 3-hole properly
grounded outlet. In the event of an
electrical short circuit, grounding
2
reduces the risk of electrical shock.
If the outlet is a standard 2-prong wall
18.
outlet, it is your personal responsibility
and obligation to have it replaced with a
properly grounded 3-prong wall outlet.
Do not, under any circumstances, cut or
19.
remove the third (ground) prong from
the Power Cord or use an adapter.
Consult a qualified electrician if
20.
the grounding instructions are not
completely understood, or if doubt
exists as to whether the appliance is
properly grounded.
Do not use the appliance for other than
21.
its intended use.
SAVE THESE
INSTRUCTIONS.