Symptom
The remote
controller does not
work
Noise or distorted
sound from the FM
radio
TECHNICAL SPECIFICATIONS
Tuner
GB
CD
INPUTS
Ampli er
Remote control
Main unit dimensions (w × h × d)
Net weight
Gross weight
Power
Standby power input
Operating conditions
66
66
XMS 1111 U_manual_cz_sk_pl_hu_de_gb_hr_si_sr_fr_it_es_et_lt_lv.indb 66
Cause
• The batteries are empty.
• The remote controller is not directed at the remote
controller sensor.
• The remote controller is outside of its operating range.
• The station is not properly tuned in.
• The FM antenna is not fully extended.
FM band range
Number of FM station pre-sets
Frequency characteristic
S/N ratio ( lter A)
Dynamic range
Distortion and noise
Supported CD les
USB
Supported USB les
Maximum size of USB device
AUX-IN
Output Power / Total music maximum power
Frequency characteristic
Battery
Temperature
Relative humidity
Correction
• Replace old batteries with new ones.
• Make sure the remote controller is directed at the remote
controller sensor.
• Make sure the remote controller is close enough to the
device.
• Tune the FM station correctly.
• Extend the FM antenna fully.
87.5 ~ 108 MHz
20
10Hz ~ 20kHz
60 dB
85 dB
15 % (Max. Power)
CD / CD-R / CD-RW / MP3 CD
USB 2.0 or USB1.1, 500 mA
FAT12, FAT16, FAT32
64 GB
3.5 mm jack
2× 15 W / 2× 30 W
10 Hz ~ 20 kHz
3 V CR2025
548 × 247 × 114
3.5 kg
4.0 kg
AC ~100–240 V, 50/60 Hz
0.9 V
0~50 °C
30~95 %
17.07.2016 16:00:44