Vogue GL280 Mode D'emploi page 3

Assembly
1. Remove all protective film, taking care to avoid scratching the surface.
2. Place the sink on the floor (Fig. 1).
3. Attach the waste kit (Fig. 2).
1
4. Attach the S/S splashback onto the sink top (Fig. 3).
5. Fix the tap onto sink top (Fig. 4). We recommend the use of PTFE tape to ensure a leak free join.
3
6. Attach sink Body and splashback together to the wall by using suitable fixings (not supplied).
7. Before using for the first time VOGUE recommend the sink is cleaned thoroughly with a suitable
cleaning agent. Remove all cleaning residues and dry thoroughly.
Cleaning, Care & Maintenance
• Clean the sink regularly using a cleaning agent suitable for use with stainless steel and galvanised
surfaces.
• Always remove cleaning agents residues, this can discolour the surface.
• Never leave any surface damp as this may cause discolouration.
All rights reserved. No part of these instructions may be produced or transmitted in any form or by any means, electronic,
mechanical, photocopying, recording or otherwise, without the prior written permission of VOGUE.
Every effort is made to ensure all details are correct at the time of going to press, however, VOGUE reserve the right to
GL280_ML_A5_v2_20180917.indb 3
2
4
change specifications without notice.
UK
3
2018/9/18 10:44