JOBO GIGA Vu extreme Manuel De L'utilisateur page 56

1.3. Working with the JD loupe
As soon as you have started the JD Loupe, two
red squares will appear on the screen, the small
one shows the area of the picture which is
magnified in the large red square.
You can move the small square around in the
picture by using the joystick. Pressing the
joystick will return you to the plain image
without the loupe.
You can zoom in by pressing the button "Loupe
–" or zoom out by pressing "Loupe +"
Pressing the third button "FIT" will take you
back to the previous menu.
The fourth button "FULL" will magnify the small
red square to whole screen. Here again you
have the option to use the JD loupe, with all
possibilities described above.
- zoom in with button "Loupe –"
- zoom out by pressing "Loupe +"
- "FIT" will take you back to the plain
picture without the loupe.
2. Incremental Backup
2.1. General
In addition there is a new easy-to-use one-
touch-software-update called Incremental Back-
up (the brain child of wildlife photographer
and loyal GIGA Vu extreme user Andy Rouse).
This update allows users who transfer the
data stored on their GIGA Vu extreme via
Incremental Back-up to an external storage
device such as the JOBO GIGA one, to
automatically synchronize the data on both
devices with just one touch. The new data
will be added to the external device without
deleting any already existing data on the
device.
56
2.2. How to get to the
Incremental Backup
- Start the device
- Press soft key button "Device"
- Scroll down to the second entry "USB
Incremental Backup"
Now you have 2 options:
1.) Incremental Backup to External Disk
This option will initialize the process of the
incremental backup.
2.) Remove Backup from External Disk
Be careful: This option will remove the data
form the external device
2.3. Advices before you start
the backup
Before you start the (incremental) backup
process we suggest to plug the AC power
adapter to both units because the procedure
will take a while. We also recommend to do the
first full backup overnight.
2.4. Make your first
(Incremental) Backup
We recommend to use a "GIGA One" as external
backup device. If you chose to use an other
device the requirements are: self-sufficient
power supply (battery or AC adapter), formatted
in FAT32, just one partition on the HDD.
Start the process as followed:
- Start the device
- Press soft key button "Device"
- Scroll down to the second entry "USB
Incremental Backup"
- Press on option 1 "Incremental Backup to
External Disk"
Before you continue turn off the external
device.