Trouble-Shooting; Technical Data; Disposal And Recycling - Pressalit CT 5000 Manuel D'utilisation

Trouble-shooting

Symptom
The change table
does not stay in
upright position .
The change table
top is not level .
The star lock
washers are loose
or fallen out .

Technical data

Materials

Disposal and recycling

The unit contains reusable materials . There are no known hazards or risks
associated with disposal of the product . All components can be discarded
after having been cleaned and disinfected . When disposing of the product,
we recommend that it be disassembled and broken down into different waste
groups for recycling or combustion .
Recyclable
components
Steel
Plastics
Cause
Gas cylinder is
defective .
The set screws are
too high/low .
The set screws are
defective .
The axle can push
them out over time
Powder-lacquered stainless steel, Melamine
Steel can be recycled by being re-melted and included
as a secondary material in the production of new steel .
Use plastic sorting and recycling systems where they are
locally available, otherwise incinerating plastic has the
added benefit of generating energy which can be used
for, for example, combined heat and power production .
Action
Contact Pressalit A/S or your
local dealer .
Adjust the set screws .
Contact Pressalit A/S or your
local dealer .
Use a hammer to put the
lock washers back in place .
Replacement star lock
washers can be ordered,
article no . LB3502
Material
en
15