Battery - AEG BX30 Mode D'emploi Rapide

HOW TO INSERT SIM CARDS AND BATTERY
1.
Remove the back cover over the battery.
2.
Pull the battery tab upwards and remove the battery.
3.
Insert the SIM card into the memory-card slot carefully, with the card's
cut edge lined up with the slot's indentation and the golden side turned
downwards until the SIM card is not able to go any further (image 1 and 2).
4.
With the battery's metal contacts turned towards the battery slot's metal
contacts, push down on the battery until it is locked in place (image 3).
FIGURE 1

BATTERY

The battery is shipped with a 50% charge, and may be used immediately
out of the box. Recharge the battery fully after the first 3 times it discharges
completely to empty, charging for at least 4 hours, in order to get the best
possible performance from your battery.
Batteries have a service life cycle. It is normal for the battery to wear out
gradually, requiring longer charge times. If the recharge cycle is very short,
the battery service life cycle is coming to an end. Replace the battery with
a new one.
Warning: Disconnect the mobile phone before removing the battery. The
battery should never be removed when the mobile phone is plugged in, as
this may damage the SIM card and the mobile phone.
FIGURE 2
FIGURE 3
17