EQUATION YL-2A15BT Mode D'emploi page 67

according to user's manual.
Please pull up the plug when you don't use it.
Please stop using the machine when its power cord or plug is damaged; please ask professional electrician
or supplier to replace it.
Notes
Don't use the damaged power cord, plug, casing or control panel.
Don't curl the power cord and also please don't touch sharp
instruments.
If you don't obey the instructions on user's manual, the machine
may be not able to be maintained.
7. Operating instructions / Drawings
The buttons and indicators on the control panel and their function:
1、POWER‐Switch ON/OFF: Control the power ON/OFF.
2、HUMIDITY—Humidity setting button: You can set four target ambient humidity 40%RH、50%RH、
60%RH,continuing humidity(CONTINUE).
3、TIMER—Timing button: Setting time of switching off: 2H、4H、8H.
4、POWER—Power indicator lamp: Lightening indicates the machine is working; Blinking indicates that the
temperature and humidity sensor tests the ambient temperature is ≤0℃ or ≥40℃ or the NTC on temperature
and humidity is cut off or short circuit
5、 WATER FULL INDICATOR—Water full indicator lamp: The indicator lamp will lighten when the water tank full
and the machine will switch off.
6、DEFROST INDICATOR—Defrosting indicator lamp: Lamp lightening indicates the machine is defrosting; Lamp
blinking indicates the temperature and humidity sensor on evaporator is cut off or short circuit;
Defrosting indicator lamp blinks two times and lightening 1 second indicate (copper NTC),testing
the copper's temperature is ＞40℃.
7、HUMIDITY INDICATOR—Humidity indicator lamp: Indicates the setting humidity data.
8、CONTINUOS INDICATOR—Continuing dehumidifying indicator lamp: Indicates the machine is working in the
continuing dehumidifying mode; if the lamp blinking, it indicates the temperature and humidity is
GB
.