Symbols; Unpacking And Inspection; Introduction - Amprobe LAN-1 Mode D'emploi

SymboLS

�
Refer to the manual
Conforms to relevant
�
Australian standards.
This equipment not
for connection to
�
public communications
networks, such as active
telephone systems.
�
Warning and Precautions
• do NoT use on live circuits. These voltage levels pose a potential shock
hazard to the user.
• To avoid electrical shock hazard, observe the proper safety precautions
when working with voltages above 60 VdC or 30 VAC rms.
• Never ground yourself when taking measurements.
• do not operate the instrument in an explosive atmosphere.
• To reduce the risk of fire or electric shock, do not expose this product to
rain or moisture.

UNPACkINg ANd INSPECtIoN

Your shipping carton should include:
1 LAN-1 Cable tester
1 Remote Terminator
1 9 volt battery
1 RJ45 to female BNC cable
1 RJ45 to male BNC cable
1 RJ45 to RJ45 cable
1 female BNC to female BNC connector
1 Users Manual
if any of the items are damaged or missing, return the complete package to
the place of purchase for an exchange.

INtRodUCtIoN

The LAN-1 Cable Tester is designed for testing opens, shorts and miswired
cable installations .
do not dispose of this
�
product as unsorted
municipal waste.
Complies with eU
�
directives
5