HumanTechnik VIBtimer Mode D'emploi page 7

Congratulations on purchasing the VIBtimer. We hope it will give
you many years of reassuring operation. Please read through
these operating instructions carefully.
Setting the count down timer:
Set the display to 0:00 by pressing the „h/m" and „m/s" buttons
at the same time.
Set the count down time by pressing the buttons „h/m" and
„m/s".
Start the count down by pressing the „Start/Stop" button once.
(Pressing the „Start/ Stop" button once again interrupts the count
down.)
The signal is activated after the set time is reached. (Signalling
light and/or vibration and/or acoustic signal).
Setting the count up timer:
Set the display to 0:00 by pressing the „h/m" and „m/s" buttons
at the same time
Start the count up by pressing the „Start/Stop" button once.
(Pressing the „Start/ Stop" button once again interrupts the
count up.)
No signal can be activated in this operating mode!
English 7