Publicité
Les langues disponibles
Les langues disponibles
storing
• Store the chopping blade in the clear bowl.
• Discs and other accessories should be stored in the storage drawer of the food processor.
maintenance
• Some parts might stain when in contact with certain vegetables. In order to avoid this, all
parts should be washed immediately after each use.
problems and solutions
PROBLEM
Food processor will not work
after switching on
Food Processor makes loud
noise or starts vibrating
Performance of disc is reduced
Motor stops after continued
heavy use
SOLUTION
• Bowl may not be locked in proper position.
• Food Chute Lid/Cover might not be locked
into position.
• Turn off and unplug unit and ensure all parts
are assembled properly.
• Turn off and unplug unit and check if there are
any residues blocking the unit.
• Turn off and unplug unit and ensure all parts
are assembled properly.
• If the holes are blocked, use a brush and clean
the disc in hot water or wash the disc in the
dishwasher.
• The motor contains a resettable fuse to protect
against overheating. Turn the food processor off
" " and unplug it from the electrical outlet.
After the food processor has cooled, plug the
food processor into the electrical outlet and
resume normal use.
8
Publicité
