Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION
1.Combine 2 wood poles together by the plastic connector,pls make sure to connect
1 pole with hole and 1 pole without hole.(fig 1)
2.Put the connected wooden pole into the fabric cover (fig 2-fig 3), put the
anti-slip cover on each bottom of the wood pole.
3. Make the ropes of the fabric cover go through the hole of the wooden pole
on the top,then tie the rope together. (fig 4)
4. Make the anti-slip wood go through the middle of the wooden poles.Then make
sure the screws are tighted. The baby tent is fixed ,and it is ready to
use. (fig 5)
Publicité
