Space Seating 829-R2C728P Instructions De Montage

DURAFLEX AVEC LA TECHNOLOGIE FLOW-THRU™
1 2
ÉTAPE ÉTAPE
13
9
2
X5
8
1
7R
ÉTAPE 4 ÉTAPE 5
13
11
X3
4
12
3
1
6
Enlever toutes les pièces du carton, les organiser selon les numéros de pièce indiqués sur la liste et vous assurer que les quantités
des pièces sont correctes.
ÉTAPE 1 Insérer cinq roulettes (2) dans la base (1), et pousser fort pour vous assurer que toutes les roulettes (2) sont bien insérées.
ÉTAPE 2 Aligner les trous dans les accoudoirs (7L et 7R) avec les trous du coussin du siège (5). Fixer les accoudoirs (7L et 7R) au coussin du
siège (5) avec trois rondelles plates (8) et trois vis d'accoudoir (9) pour chaque accoudoir. RESSERRER COMPLÈTEMENT TOUTES LES VIS
AVEC LA CLÉ ALLEN (13).
ÉTAPE 3 Fixer le mécanisme (4) au coussin du siège (5) avec la flèche vers l'avant du siège, au moyen de quatre rondelles plates (8) et quatre
vis de mécanique (10). RESSERRER COMPLÈTEMENT TOUTES LES VIS DE MÉCANIQUE (10) AVEC LA CLÉ ALLEN (13).
ÉTAPE 4 Fixer le support du dossier (12) à l'arrière du mécanisme (4) avec trois vis de support de dossier (11).
RESSERRER COMPLÈTEMENT TOUTES LES VIS AVEC LA CLÉ ALLEN (13).
ÉTAPE 5 Insérer le vérin pneumatique (3) dans la base (1). Placer le siège assemblé sur le vérin pneumatique (3) et mettre de la pression.
ATTENTION : AVANT D'UTILISER LE FAUTEUIL, VOUS ASSURER D'AVOIR RESSERRÉ COMPLÈTEMENT TOUTES LES VIS.
829-R2C728P / 829-3R1C628P
829-R22C728P / 829-R11C628P
FAUTEUIL DE DIRECTION À DOSSIER
INSTRUCTIONS DE MONTAGE
3
ÉTAPE
13
9 X3
8
X3
5
X3
10
X3
8
7L
5
PIèCE
1.
Base . . . . . . . . . . . . . . . . . . . . . . . 1
2.
Roulettes . . . . . . . . . . . . . . . . . . . . 5
3.
Vérin pneumatique . . . . . . . . . . . . 1
4.
Mécanisme . . . . . . . . . . . . . . . . . . 1
5.
Coussin du siège . . . . . . . . . . . . . . 1
6.
Assemblage du dossier . . . . . . . . . 1
7.
Accoudoirs (7L et 7R) . . . . . . . . . . 2
8.
Rondelles plates . . . . . . . . . . . . . 10
9.
Vis d'accoudoir . . . . . . . . . . . . . . . 6
10.
Vis de mécanique . . . . . . . . . . . . 4
11.
Vis de support de dossier . . . . . . 3
12.
Support de dossier (préinstallé) . 1
13.
Clé Allen . . . . . . . . . . . . . . . . . . . 1
X4
X4
4
1
QTÉ
LIMITED WARRANTY
SPACE ® chairs are warranted* from the date of purchase against failure due to material and workmanship as follows:
• Lifetime on component parts including pneumatic cylinder, control mechanism, base and casters.
• 3 Years on upholstery fabric and foam against wear and deterioration.
*All warranties are limited to the original purchaser for normal commercial usage defined as a standard forty hour work week by
persons weighing 300 lbs. or less. This warranty will not cover labor, freight or damage from misuse, abuse, negligence, alteration,
accident, vandalism, rusting, acts of nature or any other event beyond the control of Office Star Products. The warranty does not
cover cosmetic damage that may result from normal use. Liability for incidental or consequential damages is excluded. The user
assumes all risk of injury resulting from use of this product. When usage is more than 40 hours per week, a five year warranty on
all parts applies. Fabric is warranted for one year. This warranty gives you specific legal rights, and you may also have other rights
which vary from state to state.
To make a warranty claim, contact Parts Department via e-mail parts@officestar.net, by Fax 1-909-930-5629, or toll free parts
number 1-800-950-7262, Monday through Friday 8:00 a.m. - 5:00 p.m. Pacific Time. Provide model number and description of the
problem and obtain confirmation number. At it's option Office Star Products will:
(a) Supply compatible components of current manufacture.
(b) Repair the customer's component.
It is the customer's responsibility to prepay freight on any components returned to the factory. Return freight on components
covered by warranty will be paid by Office Star Products.
© Office Star Products Janvier 2011
829-R2C728P / 829-3R1C628P
829-R22C728P / 829-R11C628P
DURAFLEX WITH FLOW-THRU TECHNOLOGY™
BACK EXECUTIVE CHAIR
OPERATING INSTRUCTIONS
FEATURES
• 4-to-1 COUNTER-BALANCE MECHANISM
Self adjusting control uses your own body-weight to balance the
force needed to recline the back to ensure the tension is always
perfectly adjusted no matter how large or small you are.
• TILT LOCK
Lift Lever (2) for free float. Lift lever (2) up to lock into any one
of five positions, including upright. To unlock, push lever (2) down and
lean back to release lock.
• SEAT HEIGHT ADJUSTMENT
To raise seat height, remove pressure from seat and lift lever (1) up.
To lower seat height, sit on chair and lift lever (1) up.
3
NOTE: It is normal for chair to slightly lower under body weight.
• ARM HEIGHT ADJUSTMENT
To adjust arm height, push button (3) in to allow the arms to move up
or down freely. Release button (3) once the desired
height is reached.
2
WARNING
1. Use this product only one person at a time.
2. Do not use this chair unless all bolts screws and
knobs are securely tightened.
3. Check that all bolts screws and knobs are tight every
three months or as needed.
4. Dispose of packing material properly. Do not use
plastic cover as head covering. It may cause
suffocation.
829-3R1C628P
5. Do not use chair as a stepladder.
(other models not shown)
6. Use this chair for its intended purpose only.
7. Use mild detergent only for cleaning.