Epson ELPLS02 Mode D'emploi page 18

3. Attach the motor cable.
(2) Mounting the front case
1. With the lens firmly in place within the opening of the front
case, replace the front case and attach it using the four screws.
Screws (four)
• Turn on the power and verify that the projector operates nor-
mally.
Memo
16
02̲SZL̲DTP̲E.p65
Front case
Be sure to remove the front lens cap before
turning on the power, or it may melt from the
heat.
Page 16
This completes installation.
03.2.19, 5:39 PM Adobe PageMaker 6.5J/PPC